Instructions for use:
1• Make sure that the wall is perfectly clean and dry before applying the mosaic. On rough or porous surfaces, it is best to apply a coat of primer and let it dry completely. If the wall is damaged, repair before tiling
2• Measure and plan the design before starting. It is recommended that lines be drawn on the surface to be used as a guide for fixing. Before gluing, make sure that the position is correct, because once the mosaic mesh is in place, it is very difficult to remove.
3• Remove the back sheet, place the mosaic on the surface and press firmly.
4• For meshes with gaps between pieces, edge the product. With a soft cloth, immediately wipe off the excess edging to prevent the mesh from being damaged.

(Follow the manufacturer's instructions for edge installation)
MATERIAL REQUIRED: Sponge, level, cutter / scissors and measure.
WARNING. Exclusive product for interiors. Do not apply the product on latex, vinyl or polyvinyl acetate (PVA) based surfaces